Why Viscosity Isn’t the Only Factor When Choosing Engine Oil

When it comes to choosing an engine oil, there’s more to it than just viscosity. While viscosity is important to ensure proper lubrication and reduce friction, it’s only one factor to consider. The quality of additives, base oil composition, suitability for application e.g. meeting specification, and advanced technologies e.g. friction-reducing enhancements, are equally critical to ensuring the best performance and protection for your engine. That’s where the EE Performance range by Millers Oils stands out.

Why Viscosity Alone Isn’t Enough

1. Friction Reduction – More Power, Less Resistance!

Viscosity refers to the thickness of the oil, and how well it flows at different temperatures, but that doesn’t automatically guarantee reduced friction. Engines, especially high-performance ones, generate extreme heat and pressure that can cause friction between moving components, leading to wear over time. The EE Performance range, equipped with NANODRIVE technology, addresses this issue head-on by using nanoparticles that further reduce friction by up to 24%, compared to standard oils. So even with the correct viscosity, your engine benefits from an extra layer of protection that viscosity alone can’t provide. With NANODRIVE, your engine gets:

• Improved overall engine efficiency
• Reduced wear on engine components, prolonging engine life
• Boosted fuel economy from a reduction in internal resistance
• Increased overall performance

2. Additive Technology – It’s What’s Inside That Counts!

The secret to superior oil isn’t just its viscosity, but the high-quality additives packed inside. Millers Oils EE Performance range uses an advanced combination of additives, such as detergents, dispersants, anti-wear agents, and friction modifiers that protect your engine in ways viscosity alone cannot. These additives:

• Keep the engine clean by preventing deposits and sludge build up
• Enhance wear protection, particularly under high-pressure
• Improve the oil’s stability over a wide range of temperatures

This means better protection, longer-lasting performance, and less maintenance!

3. Engine-Specific Requirements

All vehicles require lubricants that meet specific standards beyond just viscosity. Modern vehicles in particular also require compliance with strict emissions standards, fuel economy improvements, and engine protection measures, which often require the use of low/mid SAPS (Sulphated Ash, Phosphorus, and Sulphur) oils to reduce harmful emissions and extend the life of emission control systems such as petrol and diesel particulate filters (PPFs/DPFs) and catalytic converters.

4. Temperature and Pressure Stability

Viscosity is temperature dependent, but as engine components heat up, the oil must still maintain its lubricating properties. Standard oils can break down or lose effectiveness in extreme conditions, leaving your engine vulnerable to wear. But, the EE Performance range stays strong. Fully synthetic formulations ensure the oil delivers consistent protection, effective under the harshest conditions—whether it’s city driving, high-speed motorway driving or track use.

5. Longer Life and Fewer Oil Changes

While viscosity helps oil flow properly, it does not tell you how long the oil can maintain its protective properties. The EE Performance range is formulated to meet manufacturer recommended oil drain intervals, ensuring that the oil doesn’t degrade quickly, providing long-lasting protection and performance without needing frequent oil changes.

Why EE Performance C3 0w30 May Be the Right Oil For You

1. Maximum Friction Reduction and Performance Gains with NANODRIVE

If you’re driving a high-performance vehicle or simply want the best protection for your engine, EE Performance C3 0w30 offers industry-leading NANODRIVE technology, which goes beyond simple viscosity by meeting these specific manufacturer requirements, providing:

• Prolonged life of after-treatment devices thanks to the mid-SAPS formulation
• Improved fuel efficiency from advanced NANODRIVE technology
• Extended engine life, reducing the frequency of maintenance and costly repairs
• Increased performance compared to a standard product

2. Cleaner and Greener

EE Performance C3 0w30 has a mid-SAPS formulation designed to prolong the life of after-treatment devices such as PPFs/DPFs and catalytic converters, This makes it ideal for drivers who are not only looking for top-tier engine protection, but perfect if you want to adhere to environmental standards without compromising on performance.

3. Manufacturer Specification Driven to be Future-Proof

EE Performance C3 0w30 meets the latest specifications from top manufacturers like Volkswagen, Audi, BMW, and Mercedes-Benz. By choosing this oil, you’re ensuring your vehicle gets the protection it needs now and in the future, complying with both manufacturer recommendations and European environmental regulations.

4. Ready for the Extreme 

Pushing your car to its limits on the track? Driving in challenging weather conditions? No problem. EE Performance C3 0w30 is designed to perform in extreme environments. The combination of fully synthetic base oils and advanced additives ensures that your engine remains protected under high temperatures and pressures, delivering reliable performance when you need it most.

Viscosity is Just One Piece of the Puzzle

While viscosity is important, it’s only part of what makes a great engine oil. Advanced additives, friction-reducing technologies, and formulations that address modern engine and environmental needs are also important. The EE Performance range, with its cutting-edge NANODRIVE technology, and compatibility with modern high-performance engines, offers a complete solution that goes beyond viscosity to deliver superior protection, performance, and efficiency.

Use the Millers Oils Stockist Locator to find your nearest stockist today!

Ready to stock EE Performance?
Explore the full range and help your customers take their engines to the next level.

Back to top