Fluid Management Division

Milliclean 1000T

Milliclean 1000T removes the lacquer, varnish and sludge that can cause pump wear, valve stick and breakdown in your hydraulic system – all while your equipment is still in operation. Unlike traditional cleaners, Milliclean 1000T is not solvent based so minimises health and safety risks.

APPLICATION:
• Before an oil change, a Millers Oils Fluid Management Technician will arrive on site, and add Milliclean 1000T to the hydraulic system at 10 – 20% sump capacity.
• Operations continue to run normally, while Milliclean 1000T acts quickly to clean all hydraulic pipework, couplings, hoses, tanks and pumps – removing lacquer, varnish and sludge.
• After a period of up to 48 hours, our Fluid Management technician will return to site and drain, flush then refill the system with fresh hydraulic oil e.g. Millmax Longlife.

Features & Benefits

  • Non-manual removal of lacquer, varnish and sludge eliminates equipment downtime, unlike standard manual cleaning regimes
  • Helps to eliminate valve sticking problems and pump wear due to varnish accumulation
  • Has no adverse effect on or any long term consequences for, hydraulic system metallurgies, finishes, elastomers or seal materials
  • Thoroughly cleans all hydraulic pipework, couplings, hoses, tanks and pumps without need for disassembly
  • Minimises H&S concerns compared to manual use of solvent based cleaners and cavitation for consistent power transfer.

For more information please contact us

Email us today
Email us today